Accessories can be purchased via the product’s drop down button on this page or on the accessories page.
Vent louver: Regardless of the method of installation, you need the Vent louver which serves as an external louvered vent with a screen mesh.
Elbow: You need the Elbow for venting if the product will be mounted on a window. Venting through the wall may also use the Elbow if desired.
Filter G2: This is a replacement filter option that can be installed in the supply side of an external louvered vent.
Filter G4: This is a replacement filter option that can be installed in the supply side of an external louvered vent.
Filter HEPA: This is a replacement filter option that can be installed inside the Inline filter box.
Inline filter box: You need the Inline filter box to supply filtered fresh air through a HEPA filter to the product. It comes with one free HEPA filter.
Inline switch: The product is built for continuous operation. You will need the Inline switch if you prefer to manually switch off the device at certain times OR need to manually and externally activate the boost mode (e.g., like a bathroom switch).
Male plug: If you intend to power the device directly with 12V DC without using the mains electricity from the wall, you will need the Male plug.
Splitter cable: If you intend to externally control the device to boost to higher speeds based on an external humidity or CO2 controller, you will need both the Inline switch & Splitter cable.